temporally repair sony camcorder error code C:32:11 C:32:10 push down mode gear gently by tiny screw driver, watch out for drum (heads) – do not touch other than mode gear. this error cause by mode gear, recommend to replace it. John Han @ MYK Camcorder Repair Service.
Brought to you by Buy Camcorders
Incoming search terms for the article:
- C:32:11 (14)
- sony dcr-hc26 C:32:11 (13)
- Powered by Article Dashboard hitachi magic (7)
- powered by article dashboard what (5)
- Powered by Article Dashboard fixes (5)
- Powered by Article Dashboard doors (4)
- Powered by Article Dashboard magic video (3)
- Powered by Article Dashboard job satisfaction (3)
- Powered by Article Dashboard sony customer support (3)
- Powered by Article Dashboard video camera repair (3)
- Powered by Article Dashboard technical support jobs (3)
- Powered by Article Dashboard magic magic (2)
- Powered by Article Dashboard magic media (2)
- sony dcr hc 26 (2)
- Powered by Article Dashboard stupid videos (2)
- Powered by Article Dashboard magic move (2)
- Powered by Article Dashboard mini (2)
- Powered by Article Dashboard technical support (2)
- Powered by Article Dashboard sony video editing (2)
- Powered by Article Dashboard magic (2)
- Powered by Article Dashboard human ii (don\t turn your back on me) (2)
- powered by article dashboard face (2)
- c32:11 (2)
- Powered by Article Dashboard the magic (1)
- Powered by Article Dashboard the magic touch (1)
- Powered by Article Dashboard turn back (1)
- Error Codes for Sony Camcorders c:32:11 (1)
- Powered by Article Dashboard video codes (1)
- Powered by Article Dashboard video editing jobs (1)
- camera sony error c 32:00 (1)
Many thanks, my 3 year old had the same problem. I took the tape slide out to see clearly the place were to push with the screw driver. After following your instructions, the error code was not showing anymore. Little hard to put back the tape slide (3 very small screws) – After job satisfaction that it worked again. In mean time purchased a TOSHIBA Camileo s20 for only 70 Euro and a 8GB SD memory and no more moving parts on this one and good quality HD 1080p 16:9 video’s.
THANK YOU SOOOOOOOOOOO MUCH!! I could fix the problem according to your instruction.
i have the same problem with my dcr-hc26 and i can’t find the mode gear
THANKS 1000000000
pero por que sucede esto???
@RetroPCDOS thanks for your advise, it makes sense.
recommend to bend springs under the mode gear, due to availability of the mode gear.
It due to the cheap grease they used at the factory cause the contacts to loose connection, only true way to fix is, to take the whole tranport apart and replaced the grease, you might what to replaced the mode gear while your at it.
worked for me thank you, :0)
Thank you so much, man. It worked fine.
did it with my trv145e digital 8 and it worked
Me funciono, gracias por el aporte….
@ColoradoSpringsBMX glad to hear that, have you ever called sony tech. support before doing this? just curious.
You are the man!!! Thank you so much! Worked for me!
Why chance ruining the camcorder permanently???
HERE’S WHAT WORKED FOR ME PER SONY TECHS:
Take OUT the battery or disconnect the AC cord.
Turn the camera ON (tape, memory, edit settings) for 15 seconds.
Turn camera to off setting.
Plug battery or AC cord back in.
VOILA!
Worked for me and I had the stupid C32:11 error code for weeks! Door would not close. Followed the SIMPLE and SAFE instructions and IT WORKED! Just like magic. I couldn’t believe it! Save your money TRY THIS!
For those who are facing HDD problems and have any Sony camera with memory stick slot , try this:
1- Place the memory stick
2- Go to “Home” -> “Manage Media” (or something like that) -> And select the option to change to the memory stick, instead of HD.
3- Go to “Manage Media” again, then to “Format Media”, so choose to format the HDD! – Now that you are running the camera from memory stick, you’ll not have any problem to format the HD.
At least worked with me! I think it worths the try!
@MrTimbobo You did great, also thank you for an idea
it doesn’t work for me . i have broke a tooth of the gear and it still doesn’t work !
i don’t really understand what to do with the screw driver on the gear !
well it worked but as soon as i removed the tape again it got stuck again.so proberbly not advisable put 4 drops of WD40 on the mode gear carful to avoid the head and dont spray it in there ,working now in and out about 100 times no problem.
Thank you Maaaan!!!
work perfect!! thanks
@qkijah You did good job!
tnx my man, it worked with my camcorder sony DCR-HC23….
works perfectly. Thanks. DCR-HC2
@pitbulld45 unfortunately it’s LCD itself.
I had two issues with my cam. The touch screen doesnt work and the C32:11 error. I tried what you said and to my suprise it did fix the C32:11. Thank you so much now if I can get the touch screen to work Any way you saved me cash so your tops in my book for that.
took a while to get it right but managed to shut the door hdr-hc5e, great work, now i dont have to take home from holidays with the door open!